Optident POV

The lighting system plays a very important part of the Loupes. As you can see with an overhead system it’s fixed in that one position. With this it’s looking exactly where you’re looking, hence the name of our product ‘Point of View’ or ‘POV’. The actual unit has several different mounting systems. This is our magnetic attachment system. As you can see the magnetic attachment system has a male and a female part. It has two magnets on the male that literally just clip straight into the front like so. We manufacturer this system for several manufacturers of Loupes, so if you don’t have our Loupes or you have Loupes already, we can fit this system onto yours. As you can see the cable is quite neatly tided round the side.

The other mounting system we offer is the universal clip. Universal clip basically clips straight onto the front of most Loupe systems, like so and then again we can tidy the cable around the side. The system comes with a control unit. The control unit has a button on the top which you hold down and press to turn the unit on. As you can see the light is colour corrected. This is a true daylight bulb that we’ve got in here, this is for LED. The battery pack will last for seven hours on full power. So if you give a single click, it will actually turn the intensity down and if you give it a single click again, it will go down further. This will therefore expand the life of the battery.

To charge the battery, all you do is unplug the cable for the light, turning off the unit first. We have a hash part here, if you hold the hash part and pull up, this is spring mounted. This is your charger. As you can see the charger unit has a space on the side for the unit to sit onto. If you look at the cable you have a red dot. If you align the red dot with the red dot on the control unit, that simply just clicks straight in.

Whilst the unit is charging, this LED at the bottom here will illuminate red. Once it’s charged which approximately takes about four hours that will turn green. The system comes with a filter; the filter is designed for when you’re working with any light cure materials. The filter just simply clips straight over the top of the light, like so.

The system comes with its own carrying case, you’ve got space for all your light, your plugs, your cables and you’ve got all your instructions and everything there as well.